 HKS Blow Off Valve BOV SSQV Modular Weld-On Flange Kit Aluminum US $29.00 
|
 GReddy Type S, R, RS / RZ Weld-On Flange Kit Aluminum US $23.00
|
| Powered by phpBay Pro |
Turbine Turbocharger?
will this fit on my 2002 mustang GT 4.6 liter V8 thanks
Turbine Turbocharger
Oil cooled and water cooled
Compressor Specs :
1.70" Compressor Inlet
1.685" or 42.81mm inducer
2.362" or 60.00mm Major
Compressor .80 A.R.
M24 T2 Compressor Housing
Turbine Specs :
1.850" Exducer
Turbine .86 A.R.
2.090" or 53.10mm Major
1.820" or 46.25mm Minor
Exhaust Outlet Flange with 5 bolt design
Comes with internal wastegate set around 8psi.
The intercooler is made by JDM # SIZE:
OVERALL: 32" X 12" X 3"
INLET: 2.5"
OUTLET: 2.5"
# HOT AIR TEMPERATURE:32°F~302°F (0°C~150°C)
# WORKING PRESSURE: 35-40 PSI
# PRESSURE DROP: 2~5psi@35psi; 0.2~0.5psi@15psi
# MADE BY HIGH QUALITY ALUMINUM
# MACHINE CUT AND STAMPED, HAND WELDED
# MUST HAVE FOR RACERS
Sure, but don't get it.
The seller doesn't mention at all who built the turbo. I found the ad, and it very specifically makes no attempt to show the side of the turbo, where the manufacturer would be stamped.
Nevermind that the specs on the turbo are far larger than what you would need for your car.
The intercooler is a cheap, universal knockoff.
I'd avoid it, and get a name brand setup, so you have at least a company standing behind it, and maybe a warrenty.
Items Recently Purchased From This Site:
| Powered by phpBay Pro |
