 ANODIZED PURPLE "CONE" BILLET ALUMINUM VALVE STEM CAPS,GREAT FOR AUTO CYCLE UTV US $6.95 
|
 BOWTIE BILLET ALUMINUM PCV BREATHER SET FORD CHEVY US $59.95
|
| Powered by phpBay Pro |
Is 600 watts rms too low for a 15" subwoofer?
I'm on a budget and really interested in the new Cerwin Vega V-max 15.2's. They've gotten nothing but great reviews. However I was talking to a car audio installer and he said 600 rms is WAY too low for a 15". Can anybody give me some input on this? Here are the specs:
Technical Specification
* Sensitivity: 87.3 dB
* RMS Power Range : 600 Watts
* Peak Power Handling: 1200 Watts
* Impedance: Dual 2 Ohm
* Low Frequency response: 20 Hz
* High Frequency Response: 500 Hz
* Diameter: 15 Inch
Features
* Rugged Die-cast Aluminum Frame
* Dual spider design with stitched tinsel leads
* Stroker� technology voice coil with PEI wire
* Powerful Double Stack Magnet Assembly
* Billet aluminum-look cone with chrome-look "C-V" logo.
* Mounting Diameter: 14-3/32" (358mm)
* Mounting Depth: 7-1/8" (181mm)
* Speaker. Displacement: 0.22 cu.Ft /6.2 liters
* Voice Coil Diameter: 2.5"
600 rms will do it for these, there a bit under rated. i would run 1000 watt RMS to them and turn the gain levels to about 3/4, this is assuming your gettign one 15 not two if your getting two go up to 2000 RMS
Items Recently Purchased From This Site:
| Powered by phpBay Pro |
