2jzgte engine. What else is "needed"?
A 2jzgte. Only going to run 18-25psi depending on how high it will let me go on pump gas. Should be 500-600 depending on boost.
What am I missing that I will need?
HKS 280 cams
T61 T4 turbo
12x24x3" intercooler
Fully braced polished stainless steel manifold
Large 46mm wastegate.
Wastegate dump tube
Super sequential blow off valve
4" intake tube with nipples for IAC and blowby
3" v-band clamp kit
3" v-Band polished stainless steel down pipe with 02 bungs
teflon core, stainless braid oil supply line, high temp drain lines & Flanges.
Gaskets.
Turbo oil return plate for oil pan.
Air filter.
750cc injectors with fuel rail.
3.5-4.0 exhaust.
Boost controller.
Heavy duity head studs.
What else specifically is still needed?
Well lets see, if you're trying to make 500-600whp you:
Don't need a 3.5-4" exhaust. A 3" will work just fine
There are other BOV's besides the SSQ that will work
HKS 280 cams are a bit of overkill for that power level.
Depending on the company who makes the IC you might want to go with a 3.5"
AEM or some other standalone might be worth investing in
Make sure that's the right turbo for your power goal. Peak HP might not be everything you're searching for
And you will probably also need a tune.
Items Recently Purchased From This Site:
Universal GT35 T4 .68AR Turbo Kit Turbo Starter Kit T4 Flange 3.0'' V-band Clamp, T304 4" ZINC COATED TURBO INTERCOOLER EXHAUST DOWN PIPE V-BAND CLAMPS+FLANGE, 4" STAINLESS STEEL TURBO/INTERCOOLER/DOWN PIPE/DOWNPIPE/HOSE V-BAND CLAMP+FLANGE, Downpipe Intercooler Turbo 3" V-BAND Clamp & Flange KITS Stainless Steel V Band, 4" T304 TURBO EXHAUST DOWN PIPE V-BAND CLAMP W/FLANGE, UNIVERSAL 3.0'' STAINLESS STEEL V-BAND CLAMP + FLANGE TURBO EXHAUST DOWNPIPE VC, T304 6-BOLT ZINC COATED TURBO INTERCOOLER EXHAUST DOWN PIPE V-BAND CLAMPS+FLANGE, SUPER T4 AR70 TURBO CHARGER+3" V BAND CLAMP FLANGE, 3" V-Band Flange Clamp Kit turbo exhaust manifold steel, 2.5" V-Band Flange Clamp Kit turbo exhaust manifold, GSP T67 T3 AR70 TURBO CHARGER+2.5" V BAND CLAMP FLANGE, 4" V-Band Flange Clamp Kit turbo exhaust manifold steel, T304 GT45 ZINC COATED TURBO INTERCOOLER EXHAUST DOWN PIPE V-BAND CLAMPS+FLANGE, T304 3" ZINC COATED TURBO INTERCOOLER EXHAUST DOWN PIPE V-BAND CLAMPS+FLANGE, OBX 3 Inch V-Band V Band ALUMINUM Clamp & Flange intercooler Turbo, UNIVERSAL 3 INCH STAINLESS STEEL TURBO V BAND CLAMP KIT + 2X 3.0" STEEL FLANGE, Universal T66 Turbo Charger T3 Flange 2.5'' V-Band Clamp Downpipe Flange .70AR, TURBO RED SSQV BOV FLANGE SILICONE REINFORCED 2.5" ADAPTER PIPE W/ CLAMPS TOYOTA, TURBO RED SSQV BOV FLANGE SILICONE REINFORCED 2.5" ADAPTER PIPE W/ CLAMPS SUBARU, TURBO RED SSQV BOV FLANGE SILICONE REINFORCED 2.5" ADAPTER PIPE W/ CLAMPS NISSAN, TURBO RED SSQV BOV FLANGE SILICONE REINFORCED 2.5" ADAPTER PIPE W/ CLAMPS HONDA, TURBO RED SSQV BOV FLANGE SILICONE REINFORCED 2.5" ADAPTER PIPE W/ CLAMPS MAZDA, 6-BOLT STAINLESS STEEL TURBO/INTERCOOLER/DOWN PIPE/DOWNPIPE V-BAND CLAMP+FLANGE, 2.5" Inch Turbo Exhaust Down Pipe Stainless V-Band Clamp Kit+2 Mild Steel Flange, 2.5" STAINLESS STEEL TURBO/INTERCOOLER/DOWN PIPE/DOWNPIPE V-BAND CLAMP+FLANGE, 6 BOLT TURBO DOWNPIPE V-BAND CLAMP DIY EXHAUST FLANGE, 3" Inch Turbo Exhaust Down Pipe Stainless V-Band Clamp Kit + 2 Mild Steel Flange, Universal T3 Flange 2.5'' V-band Clamp Flange .63AR Turbo Charger + 2.5'' Clamp, Universal T66 Turbo Charger T3 Flange 2.5'' V-Band Clamp Downpipe Flange .48AR, Universal T66 Turbo Charger T3 Flange 2.5'' V-Band Clamp Downpipe Flange .48AR,
