I have a 1980 Camaro steel hood with approximately a 16" OD hole cut in it for the breather to come up through.
On top of this is a '67 Corvette 427 fiberglass hood scoop to provide some additional clearance.
I just bought a 2" carb spacer, and now I lack about 1/2"-3/4" for the breather to clear the top of the hood scoop when the hood is closed.
The scoop is only screwed on right now, but I am going to rivet and bond it later.
go to your local auto parts store and buy some fiberglass sheets and some resin. remove the scoop and cut it in halfand add as much space as needed with the fiber glass and resin,after it sets sand it and put a thin coat of body filler on the inside and outside to add support and to make it paintable.
2'' aluminum 4 hole torque style carb spacer kit,HOLLEY,edelbrock,rat rod, 4 Barrel Phenolic 1" 4 Hole 4bbl Holley Carb Spacer & Studs, CARB SPACER 1 INCH HOLLEY OPEN OR 4 HOLE ALUM/PHENOLIC , Holley 1" Aluminum Carb Spacer 4 hole and Open NEW, MOROSO 1" PLASTIC 4150 CARB SPACER,4-HOLE PLE,64930, ROCHESTER,QUADRAJET,QJET,OR SPREAD BORE HOLLEY,PHENOLIC SPACER,STOP HEAT DAMAGE, CARBURETOR SPACER,1/4"EDELBROCK/CARTER/AFB/AVS,HEAT STOP ! BEST GRADE MADE !!!, CARB SPACER 1 INCH HOLLEY OPEN OR 4 HOLE ALUM/PHENOLIC, Two Edelbrock 8703 2'' Aluminum 4 Hole Carb Spacers, CV Products Billet Aluminum 4 hole Holley Carb Carburetor spacer lightweight NEW, CV Products Billet Aluminum 4 hole Holley Carb Carburetor spacer lightweight NEW, CV Products Billet Aluminum 4 hole Holley Carb Carburetor spacer lightweight NEW, CV Products Billet Aluminum 4 hole Holley Carb Carburetor spacer lightweight NEW, CV Products Billet Aluminum 4 hole Holley Carb Carburetor spacer lightweight NEW, 1/2 phenolic 4 hole carb spacer kit,HOLLEY,gaskets,etc, 1" inch Carb Carburetor Billet Aluminum Tapered 4 hole Spacer 4150 1, 2'' aluminum 4 hole torque style carb spacer kit,HOLLEY,AFB,edelbrock,rat rod, Trans-Dapt 2432 Carb Spacer Aluminum 2" Thick 4 Hole , Carb Spacer Kit W/ Open 4-Hole And Tapered 4-Hole, JEGS Performance Products 15461 1'' Spacer, 4-Hole 4150 Carbs, Carb spacer 2" 4150 series poly 4 hole, 2" Aluminum Four Hole Carb Spacer for 4150 flange intake manifolds/carb, WIDE PHENOLIC 4 BARREL CARBURETOR 4 HOLE CARB SPACER 650-800cfm HOLLEY, HIGH RISE 4 HOLE PHENOLIC 600cfm CARBURETOR HOLLEY CARB SPACER VELOCITY STACK, POLY RESIN 4 HOLE 600 CARBURETOR HOLLEY DOUBLE PUMPER CARB SPACER BOTTOM RADIUS, POLY RESIN 4 HOLE 600 CARBURETOR HOLLEY DOUBLE PUMPER CARB SPACER RADIUS BOTTOM, TRICK BLACK RESIN 4 HOLE 390 CARBURETOR HOLLEY DOUBLE PUMPER CARB SPACER RADIUS, ALUMINUM 4 HOLE 390cfm CARBURETOR HOLLEY DOUBLE PUMPER CARB SPACER SPEC LATE MOD, 1" Phenolic Plastic Carb Spacer Holley 4150 Carburetor 4 Hole Style With Gaskets, 2'' phenolic 4 hole carb spacer kit,HOLLEY,edelbrock,
